The EPIRB Tester 406 02
 
   The EPIRB Tester is designed for check the Emergency Radio Beacons according to the SOLAS requirements 74 - 48, the IMO resolutions A.695(17) and A.810(19), the COSPAS/SARSAT procedures T.007 and the Russian Marine Register rules. The check is carried out in the shielded rooms such as the conning bridge, the hold etc with the 6x6x2,5 m overall dimensions
 
The parameters of the COSPAS/SARSAT EPIRBs can be tested by the EPIRB Tester 406 02:
 
   1. Message format- country
       - protocol flag
       - private protocol and number
       - protocol type
       - switching on type
   2. Code- from 1 to 112 bit
       - from 26 to 85 bit
       - BCH error correcting code
   3. Frequency 406,025 MHzMHz
   4. Frequency 121,5 MHz (+) (-)MHz
   5. Phase angle (+)(-)Degrees
                                                     6. Rate of phase rise µs
                                                     7. Power 406,025 MHzdb/v
                                                     8. Power 121,5 MHzdb/v
                                                     9. Total Transmission Timems
                                                     10. Unmodulated Carrier Timems
                                                     11. Sweep modulation
 
  
All parameters can be checked automatically or the manual mode - picked parameter can be checked individually. The device is supplied with power supply unit. The measurements are carried out by means of EPIRB's testing-antenna or FR-cable. The obtained results can be displayed, written in EEPROM of the tester, printed out on the special printer, or transmitted to the computer.
According to service conditions the device is designed for the operation in the internal ship rooms at temperature range 0C ...+55C, relative humidity 95% at 40 C. The overall dimensions of the device without antenna are 200x75x45. The weight is 1.5 kg.
 
The EPIRB Tester 406 02 allows to check the Emergency Radio Beacons of any stamps and all modifications with various frequency of registration in a system COSPAS/SARSAT (406,025; 406,028; 406,030) according to the program of transition on new frequencies developments the Emergency Radio Beacons.
 
 
The EPIRB Tester has a Certificate of Russian Marine Register.
 
 
The EPIRB Tester
 
The EPIRB Tester is designed for check the Emergency Radio Beacons according to the SOLAS requirements 74 - 48, the IMO resolutions A.695(17) and A.810(19), the COSPAS/SARSAT procedures T.007 and the Russian Marine Register rules. The check is carried out in the shielded rooms such as the conning bridge, the hold etc with the 6x6x2,5 m overall dimensions.
 
The parameters of the COSPAS/SARSAT EPIRBs can be tested by the EPIRB Tester:
 
 
№ Name of tested parameterUnit
1Message format- country
- protocol flag
- private protocol and number
- protocol type
- switching on type
2Code- from 1 to 112 bit
- from 26 to 85 bit
- BCH error correcting code
3Frequency 406,025 MHzMHz
4Frequency 121,5 MHz MHz
5Phase angle (+)(-)Degrees
6Rate of phase riseµs
7Power 406,025 MHzW
8Power 121,5 MHzW
9Total Transmission Timems
10Unmodulated Carrier Timems
11Power supplyaccumulators or 24VDC
 
 
All parameters can be checked automatically or the manual mode - picked parameter can be checked individually. The device is supplied with power supply unit. The measurements are carried out by means of EPIRB's testing-antenna or FR-cable. The obtained results can be displayed, written in EEPROM of the tester, printed out on the special printer, or transmitted to the computer.
According to service conditions the device is designed for the operation in the internal ship rooms at temperature range 0C ...+55C, relative humidity 95% at 40 C. The overall dimensions of the device without antenna are 200x75x45. The weight is 1.5 kg.
 
Курсы валют на PROext
Выжить.ру